• The backswimmer Notonecta hangs inverted from the water's surface. Its respiratory bubble covers the bulk of its body.

    The backswimmer Notonecta hangs inverted from the water's surface. Its respiratory bubble covers the bulk of its body.

    Photo / John Bush and Morris Flynn

    Full Screen
  • The Fisher spider Dolomedes triton uses an air layer, approximately 0.2 mm thick, as an oxygen supply.

    The Fisher spider Dolomedes triton uses an air layer, approximately 0.2 mm thick, as an oxygen supply.

    Photo / John Bush and Morris Flynn

    Full Screen
  • The water boatman uses a thin layer of air as an

    The water boatman uses a thin layer of air as an "external lung" allowing it to breathe underwater.

    Photo / John Bush and Morris Flynn

    Full Screen

Life in a bubble

The backswimmer Notonecta hangs inverted from the water's surface. Its respiratory bubble covers the bulk of its body.

Research shows how insects use trapped oxygen to breathe underwater


Hundreds of insect species spend much of their time underwater, where food may be more plentiful. MIT mathematicians have now figured out exactly how those insects breathe underwater.

By virtue of their rough, water-repellent coat, when submerged these insects trap a thin layer of air on their bodies. These bubbles not only serve as a finite oxygen store, but also allow the insects to absorb oxygen from the surrounding water.

"Some insects have adapted to life underwater by using this bubble as an external lung," said John Bush, associate professor of applied mathematics, a co-author of the recent study.

Thanks to those air bubbles, insects can stay below the surface indefinitely and dive as deep as about 30 meters, according to the study co-authored by Bush and Morris Flynn, former applied mathematics instructor. Some species, such as Neoplea striola, which are native to New England, hibernate underwater all winter long.

This phenomenon was first observed many years ago, but the MIT researchers are the first to calculate the maximum dive depths and describe how the bubbles stay intact as insects dive deeper underwater, where pressure threatens to burst them.

The new study, which appears in the Aug. 10 issue of the Journal of Fluid Mechanics, shows that there is a delicate balance between the stability of the bubble and the respiratory needs of the insect.

The air bubble's stability is maintained by hairs on the insects' abdomen, which help repel water from the surface. The hairs, along with a waxy surface coating, prevent water from flooding the spiracles--tiny breathing holes on the abdomen.

The spacing of these hairs is critically important: The closer together the hairs, the greater the mechanical stability and the more pressure the bubble can withstand before collapsing.

However, mechanical stability comes at a cost. If the hairs are too close together, there is not enough surface area through which to breathe.

"Because the bubble acts as an external lung, its surface area must be sufficiently large to facilitate the exchange of gases," said Flynn, who is now an assistant professor of mechanical engineering at the University of Alberta.

The researchers developed a mathematical model that takes these factors into account and allows them to predict the range of possible dive depths. They found that there is not only a maximum depth beyond which the bubble collapses, but a minimum depth above which the bubble cannot meet the insect's respiratory needs.

Though the researchers found that the insects can go as deep as 30 meters below the surface, they rarely venture deeper than several meters, due to environmental factors such as amount of sunlight, availability of prey and the presence of predators.

The researchers first took an interest in the external lung phenomenon when they accidentally captured one of the underwater breathers while looking for water striders. A few years ago, Bush and colleagues figured out how the striders use surface tension to glide across the water's surface.

Other researchers have explored systems that could replicate the external lung on a larger scale, for possible use by diving humans. A team at Nottingham Trent University showed that a porous cavity surrounded by water-repellent material is supplied with oxygen by the thin air layer on its surface. The surface area required to support human respiration is impractically large, in excess of 100 square meters; however, other avenues for technological application exist. For example, such a device could supply the oxygen needed by fuel cells to power small autonomous underwater vehicles. 

The research was funded by the National Science Foundation.


Topics: Mathematics

Comments

Back to the top