Skip to content ↓

Solving the world’s plastic problem

Alumna invents continuous, zero-toxic-emission system that converts nonrecycled plastics into crude oil.
Press Inquiries

Press Contact:

Abby Abazorius
Phone: 617-253-2709
MIT News Office

Media Download

 Priyanka Bakaya
Download Image
Caption: Priyanka Bakaya
Credits: Photo courtesy of PK Clean
PK Clean recently opened its first commercial plant in Salt Lake City, where its catalytic depolymerization system converts up to 10 tons of plastic per day into 60 barrels of oil, with zero toxic emissions.
Download Image
Caption: PK Clean recently opened its first commercial plant in Salt Lake City, where its catalytic depolymerization system converts up to 10 tons of plastic per day into 60 barrels of oil, with zero toxic emissions.
Credits: Photo courtesy of PK Clean

*Terms of Use:

Images for download on the MIT News office website are made available to non-commercial entities, press and the general public under a Creative Commons Attribution Non-Commercial No Derivatives license. You may not alter the images provided, other than to crop them to size. A credit line must be used when reproducing images; if one is not provided below, credit the images to "MIT."

Close
 Priyanka Bakaya
Caption:
Priyanka Bakaya
Credits:
Photo courtesy of PK Clean
PK Clean recently opened its first commercial plant in Salt Lake City, where its catalytic depolymerization system converts up to 10 tons of plastic per day into 60 barrels of oil, with zero toxic emissions.
Caption:
PK Clean recently opened its first commercial plant in Salt Lake City, where its catalytic depolymerization system converts up to 10 tons of plastic per day into 60 barrels of oil, with zero toxic emissions.
Credits:
Photo courtesy of PK Clean

Plastic is becoming a major problem worldwide: In 2012, the United States alone produced roughly 32 million tons of plastic waste, while only recycling about 9 percent of its plastic, according to the Environmental Protection Agency.

This is because of the growing use of “nonrecycled” plastics, primarily made of polystyrene and polypropylene. Seeing little return value, recyclers toss these plastics into landfills, where they pile up and never decompose. As a result, landfill space is becoming a concern.

But now MIT spinout PK Clean, founded by Priyanka Bakaya MBA ’11, aims to end the landfilling of plastic with a cost-effective system that breaks down nonrecycled plastics into oil, while reusing some of the gas it produces to operate.

“Plastic comes from oil to begin with, so it makes sense, instead of landfilling plastic, to convert it back to usable fuel,” Bakaya says. “The goal is to end landfilled plastic waste forever — not just domestically, but also globally.”

PK Clean’s so-called “continuous” system — the first of its kind in the United States, according to Bakaya — runs on a process called catalytic depolymerization, where heat and a catalyst break down plastics into crude oil to sell to refineries.

About 70 to 80 percent of the product comes out as oil. Roughly 10 to 20 percent becomes hydrocarbon gas that heats the system, while the remainder is char residue.

Following a trial in Pune, India, PK Clean last year built and installed its first full-scale commercial plant in Salt Lake City, partnering with Rocky Mountain Recycling, Utah’s largest recycler.

Operating continuously, the plant can convert up to 10 tons of plastic per day into 60 barrels of oil, with zero toxic emissions. Produced at around $35 per barrel, the oil is sold to a nearby refinery for around $100 per barrel.

After nearly a year of operations in Utah, PK Clean plans to partner with other recyclers across the nation. Eventually, Bakaya says the plan is to move to developing countries, “where plastic waste is even more of an issue.”

Pushing the envelope in design

Plastics come in seven categories: Type 1 (such as water bottles and soda bottles) and type 2 (foggy plastics, such as milk cartons) are easily recycled. But types 3 through 7 — including plastic foam, disposable utensils, plastic pipes, food-storage containers, and shampoo bottles — are either not easily recycled or unrecyclable.

To convert these plastics into oil, PK Clean first shreds them. The shreds are then entered into a reactor — which runs at about 400 degrees Celsius — where a catalyst helps degrade the plastics’ long carbon chains. This produces a vapor that runs through a condenser, where it’s made into oil.

Systems using similar processes have been around for years. But these have been too energy-inefficient and costly for recyclers to adopt. On the other hand, PK Clean’s system, Bakaya says, costs a quarter the price of other systems to run, while producing greater yields.

“We had to push the envelope with the design and operating costs to make something that can be adopted and easily used,” Bakaya says.

Much of the system’s innovation is in its continuous operation. Other systems operate through “batch processing,” where reactors heat up and then cool down again before the next batch is ready — wasting significant energy and money. But the hydrocarbon gas produced by PK Clean’s system maintains the reactor’s heat, avoiding constant rebooting and energy loss.

Additionally, PK Clean adds a catalyst that helps produce greater yields in the conversion process. Automated controls also make the system much easier to use.

Within two years, Bakaya says, PK Clean aims to produce more refined fuel that recyclers can immediately pump back into their recycling trucks, without the need for oil refineries.

“The system is pretty close, but we have to be on the exact specs, so we’d rather let a refinery handle that now,” Bakaya says.

Throughout 2011, PK Clean won awards and funding from tech entrepreneurship competitions, including the MIT Clean Energy Prize (track winner), the MassChallenge (winner), the Rice Business Plan Competition (best energy business plan), and the Cleantech Open (runner-up for the national grand prize, and track winner).

Since then, Fortune, Forbes, Inc., and other publications have praised the company for its innovation, and lauded Bakaya as a top entrepreneur in clean energy.

A clean-tech journey

Growing up in Australia, Bakaya was introduced to clean technologies through a close family friend, inventor Percy Kean — the creator of PK Clean’s catalytic depolymerization technology, and the “PK” in the company’s name.

Kean had spent decades researching and inventing clean technologies in his home, even turning his kitchen into a lab. Bakaya and her family would visit him often. “He’d show me oil samples, light it with a match, and say it came from waste. That sparked my imagination,” she says.

Those fond memories lingered during Bakaya’s undergraduate years at Stanford University, and during her career forecasting oil prices on Wall Street in the mid-2000s. Oil had then crept up to about $140 per barrel, ushering in a new demand for clean energy. So when Kean died in 2007, Bakaya set out to commercialize his work.

Visiting a friend who was studying chemical engineering at MIT, Bakaya sat in on an MIT Sloan School of Management class, 15.366 (Energy Ventures) — taught by Bill Aulet, managing director of the Martin Trust Center for MIT Entrepreneurship — where she saw a path forward.

“I thought, ‘Wow, this is exactly what I need to get started on setting up this company,’” she says.

Enrolling in MIT Sloan, she spent two years building her company. Classes such as 15.366, where students incrementally design business plans, “really push you to think about all aspects of the business,” Bakaya says.

Through that class, she also met graduate student Arjun Gupta SM ’11, who helped with early designs of the system.

Outside the classroom, she frequented MIT’s Entrepreneurship Club and Energy Club, where she found support among dozens of other hopeful entrepreneurs. “Having other people going through the same thing is something I wouldn’t have had if I hadn’t gone to MIT,” Bakaya says. Today, this close group of 30 to 40 budding entrepreneurs still help one another promote their businesses via social media.

After graduation, she says, PK Clean benefitted — and continues to benefit — from the “MIT brand name.” Apart from lending credibility to the technology, Bakaya believes coming from MIT helped the company find early investors, and get chosen for a Bay Area incubator.“Looking back, those three things at MIT — the classes, the network, and the brand name — have been an enormous help in launching the company and getting started,” Bakaya says. “PK Clean wouldn’t be possible without MIT.”

Related Links

Related Topics

Related Articles

More MIT News